|
|
BLOCKSignalling Aspect Controller ASP1-NS
Ideal for light signals. You can operate them from toggle switches when you only have a couple of aspects to operate, but when it comes signals with more aspects the wiring can become complex.
The solution that would add some simple automation to 2-, 3- or 4-aspect signals, without the need for soldering, programming or making any additional connections.
The power feed connects to two terminals, with up to 5 wires from the signal connecting to the remaining terminals (the ground terminal has two wires connected, the signal common and ground).
You can power the module from 8V-25V DC, 12V to 16V AC, or from a DCC feed. The module reduces the supply voltage down to 12V to feed the signals. External resistors are not required, as these are built into the module.
Features
- Controlling multi-aspect signals on model railways has never been easier - Detects trains passing signals using its in-built infra-red sensor - Operates from 8V to 25V DC, 8V to 16V AC, or uses DCC as a power feed and feeds signals at 12V - Fades leds in and out to simulate incandescent bulbs - Very simple to connect up to signals - No soldering required, all components are ready wired-up - No programming required (but you can adjust all settings if you wish)
Power Supply
The module will operate reliably with a power supply in the range of 8V to 25V DC, or 12V to 16V AC, or a DCC feed from the track for example.
Each Unit comes with full fitting instructions but to view these before purchasing please copy and paste the link below to your Internet Browser:
http://www.blocksignalling.co.uk/index.php/aspect-controller-asp1-ns
Please Note: Signal in the image is NOT included
|