Shop Home

Revert to AUDConvert to NZDConvert to USDConvert to CAD

Items:  |  Value:
View your Cart Contents Checkout Now

Secured payments via WorldPay and PayPal

Shop Home |  Power, Control & Electrical |  DCC Decoders |  ESU LokPilot Nano Standard DCC Decoder 8-pin interface with wire harness 53661



 

ESU LokPilot Nano Standard DCC Decoder 8-pin interface with wire harness 53661

Ref: 53661


$42.00
Shipping per unit: $2.00

Quantity:  

Product Details:
ESU LokPilot Nano Standard DCC Decoder 8-pin interface with wire harness 53661

Our Decoders are now classed as a normal product for shipping with individual shipping price as quoted above. IF you are purchasing an item marked Free Shipping and wish to purchase decoders at the same time please contact us BEFORE placing your order and we will amend the decoder to go with the loco for no added shipping.

The LokPilot Nano Standard is the smallest ESU decoder. Due to the utilisation of sub miniature components as well as the latest production technology we are now in position to build an ESU decoder on a base of only 8.0 mm x 7.0 mm. It is only 2.4 mm high (2.8 mm at one position) and thus is shallow enough to fit into very small locomotives, even in TT and N scale. Despite its very compact size we have not made any shortcuts with regard to quality and robustness.

The LokPilot Nano Standard will be available with all commonly used interfaces: besides the well known 6-pole NEM 651 plug (with and without wire harness) there will also be a version with the 8-pole NEM 652 plug.
Operating modes

The LokPilot Nano Standard is a first class DCC decoder. 14-128 speed steps and 2- respectively 4-digit addresses go without saying. Thanks to RailComPlus® the decoder automatically registers with suitable digital command stations (e.g.: ECoS). It supports all DCC programming modes and can be controlled and programmed by all DCC compatible digital command stations: thanks to RailCom®, reading out CV values is also possible on the main.

When using the ESU LokProgrammer, programming directly on your PC monitor is particularly easy and comfortable.

The LokPilot Nano Standard decoder is also suitable for analogue DC operation. Thus you may also take your locomotives to the layouts of your “non-digital” friends.
Motor control

Of course you expect excellent motor control from your ESU decoder. Our “little one” is no exception. The amplifier of the LokPilot Nano Standard decoder supplies up to 0.75A continuous current and can handle all commonly used DC and coreless motors; no matter if it is a motor made by ROCO®, Fleischmann®, Tillig®, Piko®, Brawa®, Bemo®, Faulhaber® or Maxon®.

Load control with 20 kHz PWM frequency assure silent running and also allows your locomotives to move at crawl speed. Load control can be adjusted by means of three CVs to the motor in your model. Due to load simulation, jerky movements are avoided even at 14 speed steps.
Functions

The LokPilot Nano Standard decoder has four function outputs supplying a maximum continuous current of 150 mA each, provided the total current including the motor output does not exceed 1 A. All important lighting functions (e.g.: blinking lights mars light, flash) are available and can be adjusted just like the brightness for each individual output. The shunting mode allows you to finely tune the movement of your locomotive in the yard area as well as the option to turn off the acceleration and deceleration with a function button.

The decoder features simplified function mapping quite similar to the “Function Mapping” as per the NMRA standard, which allows for easy assignment of the function outputs to any function button (F0 through F20).
RailComPlus®

With RailComPlus® the decoder automatically registers with all suitable command stations and, if necessary, receives a new address. Forget cumbersome data entry and programming!
Protection

Naturally the motor output is protected against overload. We simply want you to enjoy your decoder for a long time!
Designed with future developments in mind

The LokPilot Nano Standard is update capable and can get is new firmware with the aid of the ESU LokProgrammer. Thus your decoder will always have current state-of-the-art technology!


It’s important to know who to trust when buying online . Why not look over our eBay customer feedback to see our rating!
Click here...

Looking for something specific? Maybe we could source it for you. Get in touch with us about what you are looking for.
Click here...

Have a problem with an item you have bought? Get in touch to see whether we can help you find the right solution for you.
Click here...

Home |  About AJM |  Testimonials |  Shipping & Returns | Contact Us | Terms & Conditions | Site Map | 

Contact Details: Stile top Farm, Lower Norwood Road, Norwood, Otley, LS21 2RA | Tel: +44 7703 408640 | Email: sales@ajmrailways.com

© 2024 AJM Railways. All rights reserved.  Web Partner: Centurius